Have Questions?
-
Guaranteed Fitment
Always the correct part
-
In-House Experts
We know our products
-
Added Value
Bolt on more power and sound!
-
Wordwide Delivery
Easy Domestic & International shipping.
Kline Innovation Porsche 996 Turbo / GT2 (2001 - 2005) Exhaust
The Porsche 996 Turbo is one of our primary marque's. After reviewing the factory exhaust, major flaws were pinpointed in all areas of the design, the sound being the most striking flaw. But also torque curves, peak power, and turbo lag were other areas that could be significantly improved. The factory exhaust is also needlessly heavy, and situated at the very rear of the car.
THE SOUND
The Factory setup produces the most lackluster sound, mainly due to a series of chambers, 600 cell catalysts, and the most prominent flaw being the lack of balance between opposing banks. Seriously, i would recommend when considering any aftermarket exhaust for a Porsche turbo, never buy an exhaust without some kind of gas balance between left and right banks. replacing the stock cats for a choice of 100cpsi, 200cpsi, or de-cat increases the sound respectively. Replacing the chambered transverse rear silencer with freeflow harmonically tuned silencers enriches the sound, and the addition of our trademark 1D CLR laminar flow X pipe raises the exhaust pitch beyond the region in which bass noise is able to penetrate the cabin, while under hard throttle and high revs, a rich and raucious vocal ensues. This design was pioneered and innovated by Kline, however several copycat designs have started to appear.
PERFORMANCE
Being a turbo car, the potential for increasing performance via exhaust and software is huge. The largest gains with our De-cat system are 40hp and 48lb/ft. In conjunction with software we achieve 70hp and 69lb/ft.
100cpsi and 200cpsi produce smaller gains of 16hp and 21hp respectively.
TECHNICAL SPECIFICATIONS
De-cat cross section 70mm OD specifically chosen for a balance of peak torque and power.
Silencer section, cross section 63mm OD
Catalysts come in a variety, from 108mm OD to 127mm OD
manifold primaries, 41mm OD, chosen specifically for faster turbo spool
MATERIALS
Available in standard 304 grade stainless steel, weight 14kg 200cell cats, 12.5 with de-cat
Inconel 625 formula one grade material, weight 8kg
Titanium G2 silencer section is also available, weight comparable to Inconel
MANIFOLDS
Standard 304 grade stainless, weight 6kg total
Inconel 625, weight, 2.9kg total
Titanium unable to endure extreme heat
ASSEMBLY TIME
Man hours
Manifolds 18 hours
Manifold Inconel 34 hours
Cat back system 14 hours
Cat back Inconel 30 hours
Tails 12 hours
Total 44 hours (1 week)
Total Inconel 76 hours (1.7 weeks)
Returns Policy
Original sales receipt must accompany returns. We accept returns for exchange or refund 14 calendar days after delivery of the product. At our sole discretion after 14 calendar days, we will offer an exchange or store credit only. Items must be in "new, unaltered and unused condition". Definition of new, unaltered and unused condition is: without showing signs of wear or damage in any way within 14 calendar days of the delivery date (after 14 days no returns are allowed) must not be a special order or a custom order (such as custom optional color or other options made for your specific order, or long lead products such as supercharger kits, headers, Performance Packages, and similar products with lead times over one week) unless noted that it cannot be returned or has a different return policy time period other than that 14 days noted in that item's particular item description If an item is received damaged or is incorrectly shipped by us please contact Customer Support immediately. Items that are defective and shipped from us or items that you did not order but received from us will qualify for store credit or a cash refund. Any shipping damage must be documented with clear photos at the time of unpacking of the product and reported within 24 hours of receipt date and time. All product returns must be authorized prior to return shipping, and MUST have an return authorization (RMA) on the shipping label. Returns without an RMA will not be refunded. Please contact (215) 859-8424 or email info@forzamotorworks.com or return shipping authorization. Refunds are contingent upon inspection of item(s) once we receive it. There is a 15% restocking fee for returned items that are not damaged. Again, you MUST contact us within 14 days if you intend to return ANY item sent from our store. Items returned to us AFTER 14 days and WITHOUT contacting us, will NOT be refunded. Customer is responsible for all shipping costs if seller is not at fault..
Shipping
Shipping times may vary and often depend on the manufacturer. Many items carry a lead time and live inventory is only as good as the information that we are provided. Please reach out for an accurate shipping time and if you have any specific time constraints. Forza Motor Works cannot be held liable for the refusal of, delay of, loss of, theft, or damage to a shipment of any item. The customer agrees to indemnify Forza Motor Works for all costs, fees, and expenses Forza Motor Works incurs as a result of any violation of any local, State, Federal, National, or International laws or regulations. Packages shipped by Forza Motor Works are shipped without insurance or signature required. These extra services are available and can be purchased for an additional cost. Please contact info@forzamotorworks.com, or call (215) 859-8424 for more information. The customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring a signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. The customer accepts these risks and agrees to release Forza Motor Works of all liability. Forza Motor Works reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited. For retail deliveries within the USA, due to the tax nexus established by the South Dakota v. Wayfair Supreme Court decision, taxes will be calculated/collected for the delivery address of each order.
Yes it is.
Please make sure that you follow below steps:
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to support@halothemes.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to support@halothemes.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
